designed and manufactured in germany designed and manufactured in germany AXIOM75-11 rev.3 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 1(2) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXIOM75-11 rev.: 3 date: 2014-07-08 oscillator type: low phase noise ocxo with sine wav e output parameter min. typ. max. unit condition nominal frequency 10.000 mhz frequency stability initial tolerance @+25c 500 ppb @ v c = 2.5 v vs. operating temperature range 25 ppb steady state operating temperature range 0 +70 c vs. supply voltage variation 10 ppb v s 5% vs. load change 5 ppb r l 5% long term (aging) per day 1 2 ppb after 3 0 days operation long term (aging) 1 st year 100 ppb after 30 days operation frequency adjustment range electronic frequency control (efc 0.8 1 ppm efc voltage v c 0.25 2.50 4.75 v efc slope ( ? f / ? v c ) positive efc input impedance 100 k rf output signal waveform sine wave r l = 50 output level +7 dbm harmonics -30 dbc spurious -90 dbc warm-up time 5 min ? f final /f 0 < 0.1 ppm phase noise -140 -150 -155 -160 dbc/hz dbc/hz dbc/hz dbc/hz @ 100 hz @ 1khz @ 10 khz @ 100 khz supply voltage v s 11.4 12.0 12.6 v current consumption (steady state) 100 ma @ +25c current consumption (warm-up) 250 ma operable temperature range -20 +75 c storage temperature range -40 +85 c enclosure (see drawing) 25.8x25.8x13.5 max. mm weight 10 g packing palette esd sensitivity 1500 v hbm as in iec 61000-4-2 notes: 1. terminology and test conditions are according to ie c standard iec60679-1, unless otherwise stated ordering code: model (specification) revision frequency [mhz] AXIOM75-11 rev.3 10.000
designed and manufactured in germany designed and manufactured in germany AXIOM75-11 rev.3 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 2(2) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections pin # symbol function 1 rf out rf output 2 gnd ground 3 v c control voltage (efc) 4 n.c. no connection 5 v s supply voltage environmental conditions test iec 60068 part ... iec 60679-1 clause ... test conditions sealing tests (if applicable) 2-17 4.6.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 4.6.3 test ta (235 5)c method 1 test tb method 1a, 5s shock* 2-27 4.6.8 test ea, 3 x per axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 4.6.7 test fc, 30 min pe r axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c revision history rev. drawing date [dd.mm.yyyy] remarks author checked 3 d0 08.09.2009 new package drawing with 0.5 mm pin s bn bn 3 d1 08.07.2014 editorial changes hh hh
|
